PWM 0-10V Dimming Function DIP Switch For Ceiling Tri-proof Light

Features of DC sensor:

1. Stand-by power ≤0.5W

2. It is adapted 12VDC input design

3. With DC operation voltage from LED driver, no need extra power from line

4. Work with 1-10v dimmable led driver for 2-step dimming function

5. Particularly suitable for price sensitive luminaries

6. Stand-by power ≤0.5W

7. 8 DIP switch keys to set hold time, stand-by dimming level, stand-by period

8.φ5.5mm rod antenna, need a small hole to expose the antenna, no shadow, no affection on the light beads array

9.39.9mm width for being applied to tri-proof light perfectly

10. 2.5-4m mounting height for being applied in parking lot, lowbay warehouse

11. 2-5m detected radius

12. Operating temperature: -25~60℃

13. Better to ceiling installation

Dimmensions of DC sensor:

Wiring diagarm of DC sensor:

Detection coverage of DC sensor:

Mechanical structure of DC sensor:

Setting of DC sensor:

Detection area(1)	In this area,movement will be detected and able to trigger the sensor.100% detection area is also known as the strong sensitvity.
Hold-time(2,3)	The period of light keeping 100% brightness after moving objects leave the detection area.
Daylight threshold(4,5)	Definition of the ambient brightness;only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as disable,the sensor works everytime it detects motion regardless the ambient brightness.
Stand-by period(6,7)	The period of light keeping low output before it's completely switched off.When it's preset as∞“,
PWM 0-10V Dimming DIP-переключатель функции для потолочного Tri-proof Light	Особенности датчика постоянного тока:

1. Мощность в режиме ожидания ≤0,5 Вт